PRODUCTS

Lynx Smart BMS 1000

د.إ4,280.00

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A (with M8 busbar connections) and 1000A (with M10 busbar connections).

The main features are:

Built-in 500A or 1000A contactor used as a fallback safety mechanism and also suitable as a remote controllable main system switch.
Battery monitor, indicating state of charge percentage and more data.
Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.
Bluetooth for use with our VictronConnect App, for setup and monitoring, including Instant Readout – key data of the BMS at-a-glance.
Local and remote monitoring using a Victron GX device, for example the Cerbo GX or Ekrano GX.
The Lynx Smart BMS is part of the modular Lynx Distribution system.

VE.Direct non-inverting remote on-off cable

د.إ80.00

Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models.

Note that it’s not necessary to use this cable on the larger SmartSolar models, as they feature an onboard Remote On/Off terminal.

The charger will be enabled when the signal on the cable is high. The charger is disabled when the source signal is pulled low or left free floating.

Note that when using this cable, it’s not possible to use the VE.Direct port for any other purpose. Such as connecting to a GX device, or for example a VE.Direct Bluetooth Smart dongle on a BlueSolar charger.

 

VE.Direct to USB interface

د.إ110.00

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.

 

VE.Direct Cable 5m

د.إ70.00

The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.

 

VE.Direct Cable 3m

د.إ60.00

The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.

 

RJ45 UTP Cable 30 M

د.إ150.00

A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.

 

 

RJ45 UTP Cable 20 m

د.إ130.00

A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.