PRODUCTS
Filter by Brand
BydByd 5
FroniusFronius 1
MGMG 2
SolarSolar 1
SuperbSuperb 10
VictronVictron 240
Top rated products
VE.Direct non-inverting remote on-off cable
د.إ80.00Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models.
Note that it’s not necessary to use this cable on the larger SmartSolar models, as they feature an onboard Remote On/Off terminal.
The charger will be enabled when the signal on the cable is high. The charger is disabled when the source signal is pulled low or left free floating.
Note that when using this cable, it’s not possible to use the VE.Direct port for any other purpose. Such as connecting to a GX device, or for example a VE.Direct Bluetooth Smart dongle on a BlueSolar charger.
VE.Direct to USB interface
د.إ110.00The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.
VE.Direct Cable 5m
د.إ70.00The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.
VE.Direct Cable 3m
د.إ60.00The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.
RJ45 UTP Cable 20 m
د.إ130.00A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
RJ45 UTP Cable 10 m
د.إ80.00A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
RJ45 UTP Cable 5 m
د.إ60.00
RJ45 UTP Cable 3 m
د.إ50.00A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
RJ45 UTP Cable 0.9 m
د.إ40.00A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.
Wall mounted enclosure for 65 x 120 mm GX-panels
د.إ100.00Wall mounted enclosure for 65 x 120 mm GX-panels
Interface MK3-USB (VE.Bus to USB)
د.إ250.00The MK3-USB allows the following products to connect to a computer for configuration and firmware updates:Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, VE.Bus BMS V2, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
