PRODUCTS
Filter by Brand
BydByd 5
FroniusFronius 1
MGMG 1
SolarSolar 1
SuperbSuperb 10
VictronVictron 230
Top rated products
Blue Smart IP65 Charger 24/8(1) 230V UK
د.إ540.00With up to 95% efficiency, the IP65 chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Storage mode:
less corrosion of the positive plates Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.
Temperature compensated charging:
The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Power IP65 Charger measures ambient temperature during the test phase and compensates for temperature during the charge process. The temperature is measured again when the charger is in low current mode during float or storage. Special settings for a cold or hot environment are therefore not needed.
Li-ion battery mode:
The Blue Power IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO₄) batteries, with automatic Li-ion under voltage protection reset.
Recovery function for fully discharged batteries:
Most reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. The Blue Power IP65 Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.
Functions:
Water, dust and chemical resistant
Seven step smart charge algorithm
Recovery of fully discharged ‘dead’ batteries
Automatic power supply function
Automatic compensation for high or low temperature
Several other battery life enhancing features
Low power mode to charge smaller batteries
Li-ion battery mode”
Blue Smart IP65 Charger 12/25(1) 230V UK
د.إ730.00With up to 95% efficiency, the IP65 chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Storage mode:
less corrosion of the positive plates Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.
Temperature compensated charging:
The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Power IP65 Charger measures ambient temperature during the test phase and compensates for temperature during the charge process. The temperature is measured again when the charger is in low current mode during float or storage. Special settings for a cold or hot environment are therefore not needed.
Li-ion battery mode:
The Blue Power IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO₄) batteries, with automatic Li-ion under voltage protection reset.
Recovery function for fully discharged batteries:
Most reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. The Blue Power IP65 Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.
Functions:
Water, dust and chemical resistant
Seven step smart charge algorithm
Recovery of fully discharged ‘dead’ batteries
Automatic power supply function
Automatic compensation for high or low temperature
Several other battery life enhancing features
Low power mode to charge smaller batteries
Li-ion battery mode”
Blue Smart IP65 Charger 12/15(1) 230V UK Retail
د.إ540.00With up to 95% efficiency, the IP65 chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Storage mode:
less corrosion of the positive plates Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.
Temperature compensated charging:
The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Power IP65 Charger measures ambient temperature during the test phase and compensates for temperature during the charge process. The temperature is measured again when the charger is in low current mode during float or storage. Special settings for a cold or hot environment are therefore not needed.
Li-ion battery mode:
The Blue Power IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO₄) batteries, with automatic Li-ion under voltage protection reset.
Recovery function for fully discharged batteries:
Most reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. The Blue Power IP65 Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.
Functions:
Water, dust and chemical resistant
Seven step smart charge algorithm
Recovery of fully discharged ‘dead’ batteries
Automatic power supply function
Automatic compensation for high or low temperature
Several other battery life enhancing features
Low power mode to charge smaller batteries
Li-ion battery mode”
Filax-2 230V/50Hz-240V/60Hz
د.إ1,000.00“The Filax has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source typically is the mains, a generator or shore power. The alternate source typically is an inverter. With its switching time of less than 20 milliseconds, sensitive loads will continue to operate without disruption. The Filax is not intended to supply high power household equipment like washing machines or electric motors.
The Filax 2 is available in two models:
230V/50Hz-240V/60Hz
110V/50Hz-120V/60Hz”
VE Transfer Switch 10kVA/230V
د.إ1,330.00The VE Transfer Switch automatically switches between different power sources: between a generator and shore power, between an inverter and a generator or between an inverter and shore power.
The VE Transfer Switch has two inputs and one output, it automatically transfers the available AC power to the output.
The VE Transfer Switch is available in two models:
5kVA, single phase, 200-250Vac
10kVA, single phase, 200-250Vac
Lynx Power In
د.إ560.00A modular DC busbar used to connect batteries to the Lynx DC distribution system, available as M8 and M10 models.
Lynx Distributor
د.إ770.00A modular DC busbar with spaces for four DC fuses. It monitors the status of each fuse and displays its condition with an LED on the front. The Lynx Distributor is part of the modular Lynx distribution system, available as M8 and M10 models.
RJ45-splitter
د.إ70.00This splitter is used to connect the MultiPlus 500VA – 1600VA range in parallel and 3 phase configurations, or in other installations where multiple VE.Bus ports are required.
SolidSwitch 104
د.إ140.00The SolidSwitch 104 will switch DC loads of up to 70V/4A and can be controlled by a low power digital signal.
The DC load can be resistive, capacitive or inductive (such as the coil of a high-power contactor).
The SolidSwitch is not reverse polarity protected and not short circuit proof.
Ekrano GX
د.إ1,930.00The Ekrano GX is the most advanced member of Victron’s GX product family, delivering unparalleled control and connectivity for your power system. As the successor to the popular Color Control GX, it features a powerful processor and a vibrant 7-inch integrated touchscreen, making system monitoring more intuitive than ever.
Designed for versatility, the Ekrano GX includes a comprehensive range of interfaces and communication ports, ensuring seamless integration with Victron devices and third-party components.
Access and control your system from anywhere using:
-
Victron Remote Management (VRM) Portal
-
The built-in touchscreen
-
A Multi-Functional Display (MFD) via NMEA 2000
-
The VictronConnect app through the built-in WiFi Access Point
Whether you’re managing an off-grid solar setup, marine power system, or industrial installation, the Ekrano GX ensures reliable, real-time monitoring and control—locally or remotely.
SmartSolar MPPT 150/70-Tr VE.Can
د.إ1,490.00“A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.”
SmartSolar MPPT 75/10
د.إ230.00A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.